Protection of breathing from dust and toxic substances. Mask and filter type single-tube or double tube, carbon filters, gas filters, filter toxins such, cartridge filter and filter all kinds. EX ไส้SHIGEMATSU PF100 PF150 TG33W TG20SV TG40SV TG50SV TG25SV TG49SV TG191SV
Showing all 36 results
"SHIGEMATSU" HALF MASK RESPIRATOR MODEL GM77,One Cartridge type, The retainer cap mount made of Silicone Comfort to fit, COMBINATION CAP type 2 points-support, Strap can be adjusted to suit for facing, Manufactured under Standard : JIS-T8151, Select the suitable cartridge against the gas at working environment model : FMDCA-700 series and FMDP2W
"AIRLINE" ACTIVATED CARBON FACE MASK MODEL PF-150, The inner layer is made of PET-woven, soft green sweat pad, comfortable & flexibility, Blocking dust, smoke, bacteria, & non - toxic vapor out by Fine Activated Carbon & 8 layer structures Catching odor such as bad breath Fitting to face by 3D structure & nosepiece.
3M-8812 Dust and metal partical masks, made of Polypropylene, maintenance free has static electricity fiber for trapping dust particles smaller than 0.3 microns. Suitable for grinding, packaging for preventing dust, drugs, powders, ceramics, mining, cement, textile and influenza 2009
HOODED RESPIRATOR MASK FOR CHEMICAL PROTECTION, Made of NEOPRENE, Yellow color, Lightweight, Easy to use and storage, Convenient respirator guards against chemical, biological, Spraying, Double filter made of silicone, Standard approval : AS/NZS1716 (Australian and New Zealand Respiratory standard)
Carbon mask with valve TG49SV + POLYESTER MESH frame prevent smell, toxic fumes, chemicals, pesticides, bacteria, paint, volatile, smelting or plating, grinding metal, electrode , food and medicine, dust, asbestos, and gas.
PARTICULATE RESPIRATORS MODEL TG255SV, Consist of 2 valves, Low cost, These respirators only protect against particles. Particulate respirators are "air-purifying respirators" because they clean particles out of the air as you breathe. Even if you can't see the particles, there may be too many in the air for this respirator to provide adequate protection.
SKU: FMD GM22฿780.00
"SHIGEMATSU" HALF MASK GAS RESPIRATORS MODEL DR-22, Dust protection and toxicity gas.Dual-cartridge makes easy breath and longer service life Materials : Tolerant of heat, resist cold and comfortable silicon rubber face piece., Cartridge made of plastic lightweight, No rust, Easy to replace cartridge, Manufacturing under Standard : JIS-8151 Suitable with cartridge against the gas model : FMDCA705, FMDCA707, FMDCA710 series, FMDP2W and FMDPM34
"SHIGEMATSU" HALF MASK RESPIRATOR MODEL GM76S, The retainer cap mount made of PVC, Comfortable to wear, COMBINATION CAP type 2 points-support, Strap can be adjusted to fit with facing, Standard approval : JIS-T8151, Suitable cartridge against the gas at working environment model : FMD104NII, FMD104NIIOV, FMDPM34 and FMDU2W
Made of ultra soft silicone. Chemical resistance. Ventilation valve "Cool Flow" cooling faster moisture, breath easier than exhaust valves. Drop Down strap to unlock the mask off easily. The cover valve for breathing to the below to reduce the fog when used with a face shield or goggles. Adjustable head straps for better vision.
NIOSH Approved. Made in USA
"SHIGEMATSU"CARTIDGE FOR ORGANIC VAPORS MODEL CA104NIIOV, 84% efficiency filtration for critical chemical vapors, Suitable for organic vapors such as spraying, thinner, lacquer, and insecticide etc.
Dust protection and toxicity gas.Dual-cartridge makes easy breath and longer service life Materials : Tolerant of heat, resist cold and comfortable silicon rubber face piece., Cartridge made of plastic lightweight, No rust, Easy to replace cartridge, Manufacturing under Standard : JIS-8151 Suitable with cartridge against the gas model : FMDCA705, FMDCA707, FMDCA710 series, FMDP2W and FMDPM34